Rt Power Press

Roll Plate Bending Machine

Roll Plate Bending Machine

Specifications

Type Plate Bending Machine
Weight 100-1000kg
Voltage 110V, 220V
Automatic Grade Automatic, Fully Automatic
Warranty 1year
Driven Electric

With the support of our engineers, we are able to provide high performing Roll Plate Bending Machine to the clients. Roll Plate Bending Machine is assembled by making use of sophisticated components that ensure efficient performance, subsequently increases production capacity. Conical bending without any extra attachments can be done by Roll Plate Bending Machine. The two bottom rolls are inclined by disengaging the dog clutch by lever fitted on the machine. Even pre-pinching of cones can be done.

Highlights

  • Robust construction
  • Smooth working
  • Efficient design
  • Longer service life


Specifications

  • The Pinch Cum Puramid Principle
    • The machine based on this principle combine the advantages of three roll pyramid type, three roll initial pinch type and four roll pinch type machines.
    • Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains.
    • An error in pre pinching can be corrected even after the shell is completed.
    • It can pre-pinch and roll the plate without removing the plate from machine after first insertion.
    • Inclined movement of bottom rolls provides wider bending span as the plate thickness increases, and better grip in thinner plates.
  • Cone Bending : The Machine has inherent feature for conical bending without any extra attachments. The two bottom rolls are inclined by disengaging the dog clutch by lever fitted on the machine. Even pre-pinching of cones can be done.


Features

  • Top roll drive for rolling thin plates.
  • Highest degree of pre-bending can be achieved and only the smallest possible width of flat remains.
  • Plate Squaring(aligning) arrangement.
  • Small dia. Top roll for small shell rolling (for reduced capacity).


The Symmetrical Three Roll Principle of Plate Pre-Prinching & Rolling

  • The plate is first lightly rolled over its full length. One of the bottom roll is brought near the top roll and plate edge is brought close to the tangent point. By lifting the other bottom roll, plate edge is pre-bent (pre-pinched)
  • The Positions of bottom rolls are reversed (interchanged) for pre-bending second edge of the plate. Note that both the edges are pre-bent without turning the plate around.
  • The rolls are brought in pyramid formation and cylinder is completed. Note that an error in pre-pinching can be corrected even at this stage.

Yes! I am interested

Submit Your Requirement





Looking for "Roll Plate Bending Machine" ?